Create an elegant keepsake with this Crochet Flowered Wedding Favor Box Pattern. A delicate white thread flower is made in two crocheted parts, sewn together, and attached to a 3-inch gift box trimmed with satin ribbon. The project is well suited to wedding favors, bridal showers, anniversary celebrations, and other special occasions. For another floral gift idea, compare it with this crochet bridal nosegay pattern.
Why You’ll Love This Crochet Project
- It creates a polished handmade favor. The layered flower gives a simple gift box a special, handcrafted finish.
- It uses a small amount of thread. One ball of size 10 crochet thread is used for the flower trim, making this a practical project for coordinated event favors.
- It practices useful shaping techniques. You will work joined rounds, build chain spaces, and shape petals with single crochet, half double crochet, double crochet, and treble crochet.
- It suits many celebrations. The white flower and satin ribbon are wedding-ready, but the design can also be adapted for showers, birthdays, or formal dinners.
- It offers flexible attachment options. The finished flower can be tied through the box lid or attached directly to the ribbon.
My Crochet Flower Tip: Make one complete flower first so you can check its scale against the 3 x 3-inch box before preparing multiple favors.
Before You Start Crocheting
This project includes one crocheted flower trim made in two parts: a five-petal outer flower and a smaller five-petal flower center. The two pieces are sewn together, then attached to the lid of a 3 x 3-inch gift box with their remaining yarn tails.
All pieces are crocheted in joined rounds. Do not turn unless otherwise indicated. The pattern uses US crochet terminology and a 1.75 mm [0 steel] hook with size 10 crochet thread.
The outer flower uses three rounds. Its petal foundation is created with chain-5 spaces, and the final round fills each space with a combination of sc, hdc, dc, and ch-2 shaping. The flower center uses two rounds and is worked into five chain-3 spaces.
Helpful abbreviations
- ch: chain
- sc: single crochet
- sl st: slip stitch
- hdc: half double crochet
- dc: double crochet
- tr: treble crochet
- RS: right side
Materials You’ll Need
- AUNT LYDIA’S® Classic Crochet Thread, Size 10: 1 ball, White
- Susan Bates® Crochet Hook: 1.75 mm [0 steel]
- 1 gift box: 3 x 3 inches (8 x 8 cm)
- Satin ribbon: 1/4 inch (3 mm) wide
- Yarn needle
The crochet thread forms both flower sections and provides the tails used to secure the finished flower to the box. The narrow satin ribbon wraps the lid and can also provide an alternate surface for attaching the flower.
Step-by-Step Crochet Instructions
Skill and technical notes
All pieces are crocheted in joined rounds; do not turn unless otherwise indicated.
The flower is crocheted in 2 parts, then sewn together and tied to the lid of the gift box.
Flower Petals
Round 1 (Right Side)
Ch 2, work 10 sc in 2nd ch from hook.
Join with slip st in first sc.
Tighten beginning tail to close center – 10 sc.
Round 2
Ch 1, (sc, ch 5, sc, ch 1) in first st,
[skip next st, (sc, ch 5, sc, ch 1) in next st] 4 times.
Join with slip st in first st – 5 petals.
Round 3
Ch 1,
[(sc, hdc, 4 dc, ch 2, 4 dc, hdc, sc) in next ch-5 space] 5 times.
Join with slip st in first st.
Fasten off.
The chain-5 spaces from Round 2 become the working spaces for the shaped petals in Round 3. Keep the stitches evenly distributed as you work around the flower.
Flower Flower Center
Round 1 (Right Side)
Ch 2, [sc, ch 3] 5 times in 2nd ch from hook.
Join with slip st in first st to create mini flower shape.
Tighten beginning tail to close center – 5 sc, 5 ch-3 spaces.
Round 2
[Ch 2, (dc, tr, ch 1, tr, dc) in next ch-3 space, ch 2, slip st in next sc] 5 times – 5 petals.
Fasten off, leaving long tail for sewing.
The long tail is important because it is used to sew the flower center to the outer flower. Avoid trimming it until the center has been secured.
Assembly and finishing
- Using the photo as a guide, sew Flower Center to Flower Petal, leaving tails to attach piece to box.
- Weave in remaining ends.
- Wrap box lid with ribbon as desired.
- Poke small holes in lid.
- Thread tails through holes and tie Flower Trim securely to lid.
- Flower Trim may also be tied or sewn to ribbon, if desired.
When poking holes in the lid, keep them small and position them beneath the flower’s center so the attachment is less visible. Tie the tails securely without crushing the crocheted petals.
Creative Ways to Use Your Project
- Wedding reception favors: Place a small treat, note, or other suitable favor inside each decorated box.
- Bridal shower gifts: Use matching white boxes and ribbon for a coordinated table setting.
- Place settings: Attach a flowered box to each place setting as both decoration and favor packaging.
- Anniversary celebrations: Choose ribbon colors that coordinate with the event’s flowers or table linens.
- Gift presentation: Use one box for a small jewelry item, keepsake, or handwritten message.
- Floral-themed displays: Pair several finished boxes with other handmade decorations, such as these crochet April flowers, for a coordinated seasonal arrangement.
Caring for and Storing Your Crochet
Because the flower is attached to a ribbon-wrapped box, treat the finished favor as a decorative keepsake rather than a washable textile.
- Dust the petals gently with a soft, dry cloth or a clean, soft brush.
- Avoid soaking the flower, ribbon, or cardboard box.
- For a small mark, use minimal moisture on a cloth and dab carefully without saturating the thread.
- Keep the box away from excessive heat and direct moisture, which can affect the ribbon and box structure.
- Store finished favors in a clean, dry container with enough room to prevent the petals from being crushed.
- If the petals become lightly flattened, reshape them gently with your fingers rather than pulling on the stitches.
- Keep stored favors away from sharp objects that could snag the fine crochet thread.
Helpful Crochet Tips for Better Results
- Keep the center closed firmly. After Round 1 of the outer flower and the flower center, tighten the beginning tail enough to close the opening neatly, but do not pull so hard that the stitches distort.
- Count the petal spaces. The outer flower should have five chain-5 spaces after Round 2, while the center should have five chain-3 spaces after its first round.
- Join carefully. Use the slip stitch joins specified in the pattern so each round remains clearly defined and the flower edges lie evenly.
- Work into the correct spaces. The outer flower’s final round is worked in the next ch-5 space, and the center’s second round is worked in the next ch-3 space.
- Maintain steady tension. Size 10 thread can show uneven tension clearly. Keep your stitches consistent so the petals have a balanced shape.
- Leave the sewing tail long. The center’s long tail is needed for assembly, and the remaining tails are needed to attach the flower to the box.
- Position the flower before tying. Place the flower on the lid first, then determine where the holes should go so the trim sits centered.
- Secure the ribbon separately. Wrap the ribbon neatly before attaching the flower, and avoid tying so tightly that the box lid bends.
- Use the right hand for finishing. A yarn needle helps you weave in loose thread ends and sew the center to the outer petals with controlled stitches.
- Make a sample before an event. A single finished favor lets you confirm the look of the ribbon, box, and flower combination before making additional pieces.
Creative Ways to Customize Your Project
The approved pattern uses White size 10 thread and a white flower, but the following ideas are optional styling choices that do not change the written crochet instructions.
- Change the ribbon color: Keep the white flower and coordinate the satin ribbon with wedding colors, seasonal colors, or the event’s table linens.
- Try a soft floral palette: Pale pink, lavender, blue, or cream accents can create a gentle bridal or spring-inspired look if you choose a different thread color.
- Use contrasting trim: A darker ribbon can make the white petals stand out more clearly on the box lid.
- Coordinate the box and ribbon: Match the box color to the ribbon for a minimalist design, or use contrasting colors for more definition.
- Create a flower collection: Pair the favor boxes with other handmade floral decorations, including crochet everlasting flowers.
- Style a bridal table: Combine the flowered boxes with a larger handmade floral accent, such as crochet flower appliques, on accessories or décor.
If you change the thread size or crochet hook, the flower’s finished scale, petal proportions, and yarn requirements may change. Test the altered materials before preparing favors so the flower still fits the 3 x 3-inch box.
Frequently Asked Questions
Is this project suitable for a beginner?
It can be approachable for a crocheter who is comfortable with joined rounds, basic stitches, chain spaces, and slip-stitch joins. The petal shaping includes hdc, dc, and tr stitches, so beginners may want to practice those stitches separately first.
What yarn is recommended?
The pattern specifies AUNT LYDIA’S® Classic Crochet Thread, Size 10, in White, using 1 ball. This fine thread creates a delicate flower appropriate for a small favor box.
What crochet hook should I use?
Use a Susan Bates® Crochet Hook measuring 1.75 mm [0 steel], as specified in the pattern.
How many flower components are made?
The flower is made in two crocheted parts: the Flower Petals and the Flower Center. The outer flower has five petals, and the center also has five petals.
Can I change the flower color?
Yes, changing the thread color is an optional styling variation. Keep in mind that the approved pattern specifies White, so a different color changes the finished appearance but not the written stitch instructions.
How is the flower attached to the box?
After the two flower parts are sewn together, the remaining tails are threaded through small holes in the lid and tied securely. The Flower Trim may also be tied or sewn to the ribbon.
Can I attach the flower without poking holes in the lid?
The supplied finishing instructions use small holes in the lid and yarn tails for attachment. They also allow the Flower Trim to be tied or sewn to the ribbon, which is an alternative placement described in the pattern.
How should I care for the finished favor?
Dust it gently and avoid soaking the crochet, ribbon, or box. Store it in a dry place where the petals will not be crushed or snagged.
Can I use a different thread or hook?
You may experiment with another thread or hook as an optional variation, but the flower’s size, texture, proportions, and yarn requirements may change. Make a sample before committing to a full set of favors.
Conclusion
This Crochet Flowered Wedding Favor Box Pattern combines delicate thread crochet with simple gift packaging to create a thoughtful handmade favor. The layered five-petal flower adds a graceful finishing touch, while the ribbon and box can be coordinated for any celebration. For related project inspiration, explore this flowered wedding favor box pattern or this crochet wedding favor box design.
